|
 |
Repairing Mortar Plus |
Yeni Sayfa 1
|
|
|
|
|
DESCRIPTION
|
|
Cement based
repairing mortar with a high ratio of polymer additives and high
adherence.3-7 mm thickness of repairs can be done and finished
in one layer. A smooth and water tight surface is obtained,
without any cracks or peeling.
|
 |
|
APPLICATION
FIELDS |
Gross concrete,
surfaces for leveling rough surfaces and for repairs.
For repairing facades, ceiling and wall plasters.
|
|
PREPARATION OF
SURFACE |
1. Application
surface must be free of all dust, paint, grease etc.
2. Cracks and broken parts on concrete surfaces must be removed,
and cleaned until a proper surface is obtained.
3. Swollen surfaces of cement based plaster must be cleaned,
cracks and holes, if any, must be repaired.
4. Surface of application must be humidified by water if
necessary.
|
|
APPLICATION |
1. 25kg of Betox
Repairing Mortar-Plus is mixed by adding 5 to 6 lt of water with
a low speed mixer, until it reaches a paste-like appearence.
2. The Betox Repairing Mortar-Plus is left to rest for 3-5 minutes, mixed
again to ensure homogeneity and applied on the prepared
surface using a steel trowel.
3. The application thickness is 3-7 mm by a steel trowel in one layer. The
application is finished by a wet sponge.
4. In hot weather, the surface must be irrigated with certain intervals
for 3 days, depending on the weather conditions.
5. On wide surfaces the smoothness of the surfaces may be ensured using
screed trowels.
|
|
CAUTION |
1. Using gloves is
recommended during use.
2. As the product is cement based, it must not be inhaled, and
rinsed with water in case of contact with skin or eyes.
3. Do not use any other additives when preparing Betox Repairing
Mortar-Plus.
4. It must be stored under dry conditions stacking 10 vertical
rows at most.
5. Do not use onto gypsum plaster and gypsum board surfaces.
|
|
COLOR |
Grey
|
|
|
SHELF LIFE |
One year from the
date of production if kept in a dry place free of humidity. The
cover of a container must be closed tightly when it is not being
used.
TOXICITY: Not toxic |
|
TECHNICAL FIGURES |
|
Application
Temperature |
+5 - + 35 C |
|
Appearance ( Colour ) |
Grey |
|
Water Mixing Ratio |
5 - 6 Lt. / 25 Kg. |
|
Working Period |
15-20 minutes |
|
Shelling Period |
20-30 minutes |
|
Application Period |
1 hour |
|
Drying Period |
24 hours
|
|
Full Drying Period |
3-7 days |
|
Dry Unit Weight ( kg/m3 ) |
1300
±100 kg / m3 |
|
Wet Unit Weight ( kg/m3 ) |
1600
±100 kg / m3 |
|
Adherence Resistance |
≥ 0.4 N/ m2 |
|
Average Resistance to Pressure ( 28 Days ) |
≥ 10 N / mm2 |
|
Packaging ( Kg ) |
25 Kg |
|
