Cement based, mineral origined ready coarse machine plaster with polymer additives.
 

Interior and exterior; concrete, gross concrete, aerated concrete, bricks, bims and all ceiling surfaces for interior and exterior.

1. Surface must be free of dust, paint, form oil and any adherence reducing material.
2. Broken or cracked surfaces and holes must be repaired before application by using appropriate material
(Betox Repairing Mortar is recommended)
3. Surface must be moistured by using water before application.
4. Plaster profiles should be used for high quality and performance on the corners.
5. Plaster nettings must be used on conjunction areas and active points.
6. Sıvax Sprinkle application is recommended, at least 24 hours before application of Sıvax-Coarse to ceiling, concrete and gross concrete surfaces.
7. Installation of pilot templates are recommended for smooth wall surface before Sıvax Coarse.
8. Sıvax Coarse is sprinkled by ready plaster machines onto prepared surfaces.
9. The surface is rubbed by strike board, trifled after hardened enough and application is finished by a moisturised sponge if wanted.
10. Second layer should be applied at least 24 hours after Sıvax Coarse application.
11. If thickness does not exceed 2 cm. one layer of Sıvax is applied. If thickness is above 2 cm. second layer sohuld be applied 24 hours after the first layer and every layer must be below 2 cm. The process can be applied up to 6 cm. thickness.
12. Sıvax-Fine can be used after strike board for smoother surfaces.

CURE: For higher robustness of the plaster, surface should be irrigated starting 3 hours after application,
for 3 days by determined time moments according to the weather conditions.

1. As it is a cement-based material mustn't be directly inhaled. In case of an eye-touch must be washed by ample water.
2. No foreign material can be added into the product. 3. Shouldn't be applied onto frozen surfaces under cold weather conditions.
4. Must be protected against fast drying under severe wind or strong sunlight conditions.
5. Ambient temperature is between +5ºC and +35ºC.