A cement-based, high performance jointing fill material with polymer additives.
 

Used in jointing applications of ceramic, faience, tile etc. materials for up to 0-6 mm. width.
 

Used on walls of inner and outer places and floor. CERAX; has a high resistance to exterior climate, mainly to extremes
of freezing and hot weather.

It offers a robust, reliable, and easy
application with polymer content. It has a
long workability period.
 

1. In order to obtain a homogeneous color and drying, dust, sawdust, construction-cement wastes, etc., which may be existing amongst spaces of jointing, should be scraped by using a thin rod and cleaned with a brush before applying pointing.
2. Spaces of pointing should be moistened before application, especially on walls.

1. Ambient temperature should be between +5 0C and +350C.
2. It shouldn’t be applied on melted, frozen or hot surfaces.
3. It shouldn’t be applied under the sun.
4. No foreign material (Lime, Plaster, Cement, Etc.) can be added into any prepared mortar.
5. Direct inspiration should be avoided because it is a cement- based material.
 

1. CERAX Pointing Fill Mortar of 20 kg with average 4-5 liters of water should be thoroughly mixed as not to remain any aggregate, preferably by low-cycle mixer or trowel.
2. CERAX Pointing Fill Mortar should be mixed just before application after left for rest for 10 minutes.
3. Mortar should be filled into jointing spaces with a mob having hard rubber tip or a jointing spreader trowel with hard rubber base.
4. It should be drawn first in a parallel and then diagonal direction in order to fill spaces thoroughly.
5. Excess of the mortar on the surface should be grazed with a soft-tipped spatula or moistened sponge- tipped spatula, and then waited for 15-30 minutes according to the ambient temperature, thus any thin layer of jointing that may be left on the surface should be cleaned.
6. Surface smoothing or cleaning procedure should be performed with the help of a dry cloth while CERAX Pointing Fill Mortar is wet.
7. This provides easy application and high performance 0-6 mm in jointing spaces.